4) You will need to have on hand drain repipe tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
The wax ring is used to seal the drain outlet on the bottom of the toilet to the drain opening in the floor. When a toilet is installed, the ring is placed onto the drain... the toilet is dropped onto the ring... and the toilet bolts (also known as closet bolts) are tightened enough to lock the toilet in place. If that wax gasket ring starts to fail or isn't seated properly? Sewer gasses can sneak out from under your toilet causing your bathroom to have that suspicious smell. It can also cause water line repair to escape, sometimes invisibly, with each flush potentially damaging the floor hidden under the toilet.
81. Ever since I heard of a crew member cross threading the regulator whilst changing the gas bottle and causing a gas explosion, I have made it a two man job. One man does the actual change, and a second checks that it has been done properly.
Sales representatives must know beforehand that almost all the answers above need to be encouraging. Otherwise, there is a slim to none chance a sale is made. Besides cold call prospecting, so much of the typical sales rep's time is spent trying to make sales when a sales situation does not truly exist.
Ventilation and insulation are important throughout your house, and especially in crawl spaces and attics. If you have a crawl space in your home, it's best to water line repair the floor with a good quality, heavy-duty plastic. Inside your home, make sure to use the exhaust fans found in most kitchens, bathroom and laundry rooms.
The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.
Sometimes there can be complications of broken toilet flanges, closet bolts or rotted sub-flooring. If you find any of that in your situation, it will need to be repaired before reinstalling the toilet.